Additives for Coatings & Inks - The Universal Selection Source – SpecialChem - elementis - liquid

Dapro® DF 17

Elementis

Dapro® DF 17 by Elementis is a general purpose, VOC-free let down defoamer. It is a blend of hydrophobic silica and mineral oil. It is designed for a broad range of latex systems, water-based paints...view more

Applications

2Documents

Contact

Get Sample

Dapro® DF 21

Elementis

Dapro® DF 21 by Elementis is a VOC-free, water dispersible defoamer. It is a blend of hydrophobic silica, emulsifiers and mineral oil. It offers excellent foam suppression and application...view more

Applications

2Documents

Contact

Get Sample

Dapro® DF 52

Elementis

Dapro® DF 52 by Elementis is a mineral oil-free defoamer. It is a dispersible blend of esters, hydrophobic silica and emulsifiers. It provides rapid bubble break and excellent persistence...view more

Applications

2Documents

Contact

Get Sample

Dapro® DF 696

Elementis

Dapro® DF 696 by Elementis is a highly efficient grind defoamer. It is an optimized blend of foam destroying particles, modified silicone and polypropylene glycol. It provides optimum foam control...view more

Applications

...

2Documents

Contact

Get Sample

Dapro® DF 880

Elementis

Dapro® DF 880 by Elementis is a silicone-free defoamer based on metallic salt of fatty acid. It offers foam suppression and rapid bubble breaking in applied wet films. It can be used as an air...view more

Applications

...

2Documents

Contact

Get Sample

RHEOLATE® 135

Elementis

RHEOLATE® 135 by Elementis is an APE-free, newtonian HASE thickener for latex paints and WB systems. It demonstrates both chain entanglement and associative thickening mechanisms with an excellent...view more

Applications

...

1Documents

Contact

Get Sample

RHEOLATE® 185

Elementis

RHEOLATE® 185 by Elementis is an APEO- & solvent-free rheological additive for low to mid-shear viscosity build and shear thinning. It is a cost-effective, alkali-soluble associative thickener...view more

Applications

2Documents

Contact

Get Sample

RHEOLATE® HX 6008

Elementis

RHEOLATE® HX 6008 by Elementis is an easy-to-use, highly efficient, non-ionic, synthetic associative thickener (NiSAT) for high shear-rate viscosity built-in water-borne systems. This pourable & pumpable...view more

Applications

2Documents

Contact

Get Sample

RHEOLATE® HX 6050

Elementis

RHEOLATE® HX 6050 by Elementis is a non-ionic, easy-to-use, highly efficient, synthetic associative thickener. It is a high-shear (ICI) builder for low and zero-VOC latex paints. It offers an excellent...view more

Applications

...

2Documents

Contact

Get Sample

SUPREAD® 2059

Elementis

SUPREAD® 2059 by Elementis is a low VOC, non-ionic surfactant and high performance wetting agent with low foaming properties. It free of alkylphenol ethoxylates and reduces foaming. Exhibits...view more

Applications

...

2Documents

Contact

Get Sample

Adherant 1051

Elementis

Adherant 1051 by Elementis acts as an adhesion promoter. Improves adhesion of organic resins to inorganic surfaces. Designed for paints and inks for epoxy, alkyd, PU, acrylic and silicone resins...view more

Applications

...

Adherant 1121

Elementis

Adherant 1121 by Elementis acts as an adhesion promoter for solvent-based air-dry paints in glass and metal substrates. Designed for epoxy, alkyd and silicone resin based coatings. It enhances salt...view more

Applications

Adherant ADK

Elementis

Adherant ADK by Elementis acts as an adhesion promoter to improve adhesion between lamination inks and PET film. Designed for gravure lamination inks on PET film, printing inks and solvent-based...view more

Applications

Dapro® 7007

Elementis

Is a special dryer for waterborne coatings. It is a version of a chelating catalyst designed to replace cobalt driers where cobalt causes undesirable side effects. It can be use din waterborne...view more

Applications

Dapro® 7008

Elementis

Is a special dryer for waterborne coatings. It is a version of a chelating catalyst designed to replace cobalt driers where cobalt causes undesirable side effects. It can be use din waterborne...view more

Applications

Dapro® BEZ 75

Elementis

DAPRO® BEZ 75 by Elementis acts as an auxiliary agent to fight settling and sagging. It is a clear, water-soluble liquid. Improves sag resistance in dipping varnishes, spray paints and in varnishes...view more

Applications

Coatings

Dapro® DF 10

Elementis

DAPRO® DF 10 by Elementis is a blend of hydrophobic silica, emulsifiers and organic oil. Acts as a foam control, agent. It is a zero VOC, opaque off-white to amber liquid. Promotes excellent...view more

Applications

Coatings

Dapro® DF 101

Elementis

DAPRO® DF 101 by Elementis is a blend of emulsifiers, silica and Silicone additives. Acts as a defoamer. It is an off-white opaque liquid. Shows excellent compatibility and is suitable for use in...view more

Applications

Coatings

Dapro® DF 108

Elementis

DAPRO® DF 108 by Elementis is a blend of hydrophobic silica in mineral oil. Acts as a defoamer. It is a VOC-free opaque off-white liquid. Imparts excellent foam control in decorative paints and...view more

Applications

Dapro® DF 109

Elementis

Dapro® DF 109 by Elementis is a blend of hydrophobic silica and silicone in mineral oil. Acts as a defoamer. It is an opaque off-white liquid. Provides rapid bubble break at low concentrations. Imparts...view more

Applications

Coatings

Dapro® DF 1181

Elementis

Silicone-modified disperion of olefinic solids foam suppressor, effective in preventing foam caused by milling, mixing or continuous agitation during manufacture or application. Highly resistant to...view more

Applications

...

Dapro® DF 12

Elementis

DAPRO® DF 12 by Elementis is a blend of hydrophobic silica, emulsifiers and organic oil. Acts as a defoamer. It is a zero VOC, opaque off-white to amber liquid that is readily dispersible in water...view more

Applications

...

Dapro® DF 1492

Elementis

Silicone-free foam suppressor can be used to prevent foam formation during mixing and provides rapid bubble-breaking in applied wet films modified polyol foam contains no aromatics. Provides good...view more

Applications

...

Dapro® DF 15

Elementis

DAPRO® DF 15 by Elementis is a mixture of liquid and particulate actives. Acts as a defoamer. Suitable for aqueous inks. Shows excellent compatibility and is suitable to use in the letdown stage of...view more

Applications

Dapro® DF 163

Elementis

DAPRO® DF 163 by Elementis is an emulsion of water, hydrophobic silica and mineral oil. Acts as a defoamer. It is a water dispersible opaque off-white liquid. Effective in a broad range of high PVC...view more

Applications

Dapro® DF 165

Elementis

DAPRO®DF 165年比较是水乳剂, hydrophobic silica and mineral oil. Acts as a defoamer. It is a mineral oil based opaque off-white liquid. Suitable for decorative paints and...view more

Applications

Dapro® DF 1760

Elementis

Dapro® DF 1760 by Elementis is a silicone-free foam suppressor that can be used to prevent foam formation during mixing. It is a modified polyol foam free from aromatics. Provides rapid...view more

Applications

Dapro® DF 19

Elementis

DAPRO® DF 19 by Elementis is a blend of hydrophobic silica and mineral oil. Acts as a defoamer. It is a VOC-free product. Suitable for semi-gloss and gloss coatings. Typically used at 0.3 – 1.0% on...view more

Applications

Dapro® DF 20

Elementis

DAPRO® DF 20 by Elementis is a blend of glycols and modified polysiloxanes. Acts as a defoamer. It is an off-white liquid. Suitable for UV inks and clear overcoats. Also effective in many...view more

Applications

Dapro® DF 209

Elementis

DAPRO® DF 209 by Elementis is a blend of silicone derivatives and hydrophobic silica in mineral oil. Acts as a defoamer. It is an opaque off-white liquid. Suitable for high quality decorative and...view more

Applications

...

Dapro® DF 2162

Elementis

Dapro silicone-free foam suppressor can be used to prevent foam formation during mixing, and provides rapid bubble-breaking in applied wet films. Provides excellent bubble resistance on roll-out...view more

Applications

Dapro® DF 300

Elementis

DAPRO® DF 300 by Elementis is a blend of metallic salt, silica, emulsifiers and petroleum oil. Acts as a defoamer. It is a silicone-free opaque off-white liquid. Suitable for industrial water borne...view more

Applications

...

Dapro® DF 303

Elementis

DAPRO® DF 303 by Elementis is a blend of esters, emulsifiers and petroleum oil. Acts as a defoamer. It is a water dispersible opaque off-white liquid. Suitable for waterborne inks and industrial...view more

Applications

Dapro® DF 307

Elementis

DAPRO® DF 307 by Elementis is a blend of hydrophobic silica, emulsifiers and mineral oil. Acts as a defoamer. It is a water dispersible opaque off-white liquid. Shows good compatibility and is...view more

Applications

...

Dapro® DF 31

Elementis

DAPRO® DF 31 by Elementis is a blend of hydrophobic particle, emulsifiers and mineral oil. Acts as a defoamer. It is an opaque off-white liquid. Effective in high quality waterborne inks, industrial...view more

Applications

Dapro® DF 3163

Elementis

Highly effective silicone free foam suppressor. Used to prevent foam formation in water based coating systems. Specially recommended against microfoam in applied coatings. Provides good storage...view more

Applications

...

Dapro® DF 38

Elementis

DAPRO® DF 38 by Elementis is a mineral oil based blend of hydrophobic silica and other foam breaking agents. Acts as a defoamer. It is an opaque off-white liquid. Particularly effective across a...view more

Applications

Coatings

Dapro® DF 39

Elementis

DAPRO® DF 39 by Elementis is a blend of hydrophobic silica in mineral oil. Acts as a defoamer. It is a VOC-free opaque off-white liquid. Particularly effective in semi-gloss and high gloss paints in...view more

Applications

Dapro® DF 406

Elementis

DAPRO® DF 406 by Elementis is a blend of hydrophobic foam destroying solids in polyglycol. Acts as a defoamer. It is a water dispersible opaque off-white liquid. Suitable for industrial paints and...view more

Applications

Dapro® DF 407

Elementis

DAPRO® DF 407 by Elementis is a blend of glycol, hydrophobic silica and organo modified siloxanes. Acts as a defoamer. It is a silicone-free, 100% active, water dispersible, opaque amber liquid...view more

Applications

Dapro® DF 408

Elementis

DAPRO® DF 408 by Elementis is a blend of hydrophobic foam destroying solids in polyglycol. Acts as a defoamer. It is an opaque off-white liquid. Particularly effective in pigmented acrylate...view more

Applications

...

Dapro® DF 4164

Elementis

Dapro foam suppressors silicone free for aquous sytems. Provides air release and bubble-breaking in most coatings and similar materials. Especially effective in preventing bubbling and pinholing...view more

Applications

Dapro® DF 420

Elementis

DAPRO® DF 420 by Elementis is a blend of hydrophobic silica, esters and emulsifiers. Acts as a defoamer. It is a water dispersible, non-explosive, amber colored liquid with mild ester-like odor...view more

Applications

Dapro® DF 451

Elementis

DAPRO® DF 451 by Elementis is a blend of oil, glycols and modified polysiloxanes. Acts as a defoamer. It is a water dispersible, non-explosive, opaque off-white liquid with a hydrocarbon-like odor...view more

Applications

Dapro® DF 455

Elementis

Dapro® DF 455 by Elementis is a blend of hydrophobic silica, esters and emulsifiers. Acts as a defoamer. It is a water dispersible, non-explosive, mineral oil-free, amber colored liquid with mild...view more

Applications

Dapro® DF 47

Elementis

DAPRO® DF 47 by Elementis is a blend of hydrophobic silica in mineral oil. Acts as a defoamer. It is a general purpose opaque off-white liquid. Suitable for water-based paints & decorative coatings...view more

Applications

Dapro® DF 503

Elementis

DAPRO® DF 503 by Elementis is a blend of metallic salt, polymeric derivatives, emulsifiers and mineral oil. Acts as a defoamer. It is a water dispersible, non-explosive, VOC-free, opaque off-white...view more

Applications

...

Dapro® DF 537

Elementis

DAPRO® DF 537 by Elementis is a blend of particles in mineral oil. Acts as a defoamer. It is a water dispersible, non-explosive, opaque off-white liquid with mild petroleum like-odor. Available in...view more

Applications

Dapro® DF 60

Elementis

DAPRO® DF 60 by Elementis is a blend of glycols and organo modified polydimethylsiloxanes. Acts as a defoamer. It is an off-white liquid that is very efficient in destabilizing both macro and micro...view more

Applications

...

Dapro® DF 602

Elementis

DAPRO® DF 602 by Elementis is a blend of glycols, silicones and silica derivatives. Acts as a defoamer. It is a water dispersible, non-explosive, opaque off-white liquid with mild petroleum...view more

Applications

Dapro® DF 603

Elementis

DAPRO® DF 603 by Elementis is a blend of cyclohexanone and a proprietary modified silicone. Acts as a defoamer. It is a water insoluble, non-explosive, clear iquid with ketone odor. Available in...view more

Applications

...

Dapro® DF 604

Elementis

DAPRO® DF 604 by Elementis is a silicone emulsion. Acts as a defoamer. It is a water dilutable, non-explosive, opaque off-white liquid with a slight odor. Available in Americas. Suitable for...view more

Applications

Dapro® DF 609

Elementis

Dapro® DF 609 by Elementis is a water-based emulsion of polysiloxanes and organomodified polysiloxanes. Acts as a defoamer. It is a water dispersable, non-explosive, opaque off-white liquid with a mild...view more

Applications

Dapro® DF 610

Elementis

DAPRO® DF 610 by Elementis is a silicone emulsion. Acts as a defoamer. It is a water dilutable, non-explosive, opaque off-white liquid with a very faint odor. Available in Americas. Suitable for...view more

Applications

Dapro® DF 615

Elementis

DAPRO® DF 615 by Elementis is a silicone emulsion. Acts as a defoamer. It is a water dilutable, non-explosive, opaque off-white liquid with a very faint odor. Available in Americas. Suitable for...view more

Applications

Dapro® DF 645

Elementis

DAPRO® DF 645 by Elementis is a mixture of polysiloxanes in glycols. Acts as a defoamer. It is a no-VOC, non-explosive, off-white liquid with a slight odor. Available in Americas. Suitable for...view more

Applications

Dapro® DF 646

Elementis

DAPRO® DF 646 by Elementis is an emulsion of glycols and modified polysiloxanes. Acts as a defoamer. It is a non-explosive, off-white liquid with a slight odor. Available in Americas. Easy to...view more

Applications

...

Dapro® DF 649

Elementis

DAPRO® DF 649 by Elementis is a mixture of polysiloxanes in glycols. Acts as a defoamer. It is a non-explosive, translucent off-white liquid with a mild, ester-like odor. Available in Americas...view more

Applications

...

Dapro® DF 661

Elementis

DAPRO® DF 661 by Elementis is a blend of glycols and modified polysiloxanes. Acts as a defoamer. It is a non-explosive, translucent off-white liquid with a mild soapy odor. Available in Americas and...view more

Applications

Dapro® DF 675

Elementis

DAPRO® DF 675 by Elementis is a blend of glycols and modified polysiloxanes-based defoamer. It is is especially useful in high quality decorative and water-based urethane, alkyd and acrylic...view more

Applications

...

Dapro® DF 677

Elementis

DAPRO® DF 677 by Elementis is a silicone emulsion. Acts as a defoamer. It is a non-explosive, opaque off-white liquid with a slight odor. Available in Americas and Asia/ Pacific. Suitable for...view more

Applications

Dapro® DF 680

Elementis

Dapro® DF 680 by Elementis is a silicone emulsion. Acts as a defoamer. It is a non-explosive, milky white liquid with a slight odor. Available in Americas. Suitable for water-based inks and coatings...view more

Applications

Dapro® DF 6800

Elementis

Polysiloxane containing hydrophobically modified silica. Acts as a foam-releasing and anti-foaming agent. Used for screen inks, thick film epoxy floor coatings and other high-build systems. Prevents...view more

Applications

...

Dapro® DF 682

Elementis

DAPRO® DF 682 by Elementis is a silicone fluid grade. Acts as a defoamer. It is a non-explosive, opaque off-white liquid with a mild odor. Available in Americas. Suitable for UV inks, overprining...view more

Applications

Dapro® DF 690

Elementis

DAPRO® DF 690 by Elementis is a blend of glycols and organo modified polydimethylsiloxanes. Acts as a defoamer. It is a non-explosive, opaque off-white liquid with a slight odor. Very efficient in...view more

Applications

Dapro® DF 7005

Elementis

Dapro® DF 7005 by is a silicone-free liquid defoamer, economical in use, for universal water-based applications. It is composed of ultra-fine dispersion of wax in mineral oil. It shows very good...view more

Applications

Coatings>Waterborne

Dapro® DF 7010

Elementis

Is a liquid defoamer, economical in use, for universal water based applications the product shows very good long-term efficiency. It is specially recommended for systems with good emulsifying...view more

Applications

Coatings>Waterborne

Dapro® DF 7015

Elementis

Dapro® DF 7015 by Elementis is a defoamer for water-based systems with very good emulsifying properties. It is an ultra-fine dispersion of wax in mineral oil. The product is specially recommended...view more

Applications

Dapro® DF 7073

Elementis

Dapro® DF 7073 by Elementis is an emulsion of water, hydrophobic silica and mineral oil. Acts as a defoamer. It is an Opaque off-white liquid. Also, it is effective in a broad range of high PVC paint...view more

Applications

Dapro® DF 7540

Elementis

Is a silicone free liquid defoamer for use in waterborne systems. It has outstanding emulsifying properties in water. The product is specially recommended for systems that are sensitive to surface...view more

Applications

Dapro® DF 7580

Elementis

Is a silicone free defoamer for water based systems and has excellent emulsion stability properties. Easy emulsifiable in dispersion paints and gives excellent properties in paints that are...view more

Applications

Dapro® DF 81

Elementis

DAPRO® DF 81 by Elementis is a blend of glycols and mineral hydrocarbons. Acts as a defoamer. It is a clear liquid imparting excellent foam control properties in aqueous foaming media. Shows...view more

Applications

Dapro® DF 84

Elementis

Dapro® DF 84 by Elementis is a blend of hydrophobic silica, emulsifiers and mineral oil. Acts as a defoamer. It is an off-white opaque liquid imparting excellent foam control properties in aqueous...view more

Applications

Dapro® DF 9010

Elementis

DAPRO® DF 9010 by Elementis is an ultra-fine dispersion of wax in vegetable oil. Acts as a defoamer. It is economical in use, for universal waterborne applications. The product shows very good...view more

Applications

Coatings>Waterborne

Dapro® DF 911

Elementis

Dapro® DF 911 by Elementis is silicone-free, high efficiency foam suppressor. It provides ease of incorporation, superior resistance to bubble build-up and film cratering during roller and brush...view more

Applications

Dapro® DF 944

Elementis

Paraffinic blend. Used as a foam suppressor for waterborne systems. Applications: exterior architectural topcoat, appliance and metal furniture primer and topcoat...view more

Applications

...

Dapro® DF 975

Elementis

Dapro® DF 975 by Elementis is silicone-free, high efficiency defoamer based on a dispersion of olefinic solids. It imparts excellent foam control properties. It offers ease of incorporation and is...view more

Applications

...

Dapro® DF 99

Elementis

DAPRO® DF 99 by Elementis is a blend of esters, glycol, organo-metallic salt and mineral oil. Acts as a defoamer. It is an off-white opaque liquid. Particularly effective in flexo, gravure & screen...view more

Applications

...

Dapro® FX 2060

Elementis

Is an effective polyamide activator for bentonite and hectorite based organoclay pregels which increases the sag resistance and reduces pigment settling of non-aqueous coatings. The product is used...view more

Applications

...

Dapro® FX 511

Elementis

Dapro® FX 511 by Elementis is a low-smelling coalescing agent. It has been designed for dispersions, dispersion paints and plasters. It is a strong solvent and plasticizer for polymeric particles...view more

Applications

Coatings Markets>Architectural / Decorative>Facade paints (plaster, concrete)

Dapro® FX 513

Elementis

Dapro® FX 513 by Elementis is an environmentally friendly coalescing agent prepared from renewable resources. It is specifically designed for low VOC paint systems. It shows excellent film...view more

Applications

Dapro® FX 514

Elementis

DAPRO® FX 514 by Elementis is ester-based coalescing agent and plasticizer. It is a water-dispersible, environment-friendly grade prepared from renewable resources. Assists in excellent film...view more

Applications

Dapro® NA 1622

Elementis

Silicone modified hydrocarbon blend used as a foam control agent. The product is manily used in exterior architectural topcoat, appliance and metal furniture primer and topcoat...view more

Applications

...

Dapro® S-65

Elementis

Dapro® S-65 by Elementis an ideal flow and leveling agent for solvent based paints, coating systems also suitable for UV curable coatings and ink systems.It is silicon free and diminishes film...view more

Applications

Dapro® W-77

Elementis

Dapro interfacial tension modifiers. Eliminates or diminishes film defects such as crawling, fish-eyes and some forms of cratering. Promotes spreading and uniform film formation on hard-to-wet or...view more

Applications

Dapro® W-95HS

Elementis

Interfacial tension modifier, eliminates or diminishes film defects such as crawling, fish-eyes and some forms of cratering. Promotes spreading and uniform film formation on hard-to-wet or...view more

Applications

...

Dapro® Bez 75

Elementis

Dapro foam suppressors silicone free for aquous sytems. Provides air release and bubble-breaking in most coatings and similar materials. Especially effective in preventing bubbling and pinholing...view more

Applications

Dapro® DF 5300

Elementis

Modified polysiloxane acts as a bubble releasing and anti-foaming agent for variety of solvent-borne coatings. Prevents the foaming of solvent based systems caused by mechanical forces such as...view more

Applications

Dapro® DF 5800F

Elementis

Modified polysiloxane acts as a bubble releasing and anti-foaming agent for variety of solvent-borne coatings. Prevents the foaming of solvent based systems caused by mechanical forces such as...view more

Applications

Coatings>Solvent-based

Dapro® DF MOM

Elementis

Is a silicon-free, anti-foaming, de-airing and anti-floating agent for paint systems containing organic solvents. It can be applied to organic enamel systems e.g.: air-drying alkyd systems...view more

Applications

Dapro® FK 321

Elementis

Quaternary ammonium compound. Acts as an effective auxiliary for reducing the resistance of paints that are sprayed electrostatically. Might causes after-tack owing to its cationic character. Can be...view more

Applications

DeuAdd MA-95

Elementis

DeuAdd MA-95 by Elementis is an amine neutralizer designed to adjust and stabilize pH of water-borne systems. Also functions as a co-dispersant to prevent re-agglomeration of pigments. It reduces...view more

Applications

DeuAdd MB-11

Elementis

DeuAdd MB-11 by Elementis is an extensive water-borne preservative. Designed to provide outstanding bacteriostasis, to disinfect emulsion, as well as water-borne paints and coatings. Prevents...view more

Applications

Coatings>Waterborne

DeuRheo 2810

Elementis

DeuRheo 2810 by Elementis acts as a rheology modifier based on modified polyurea. It can build up three-dimensional structure after being mixed into coating system. The resulting thixotropic flow...view more

Applications

DeuRheo WT-105A

Elementis

比较DeuRheo wt - 105 a是一个关联流值ology modifier based on polyether polyurethane. It provides thickening and flowing properties. It increases medium shear viscosity to improve flow...view more

Applications

DeuRheo WT-108F

Elementis

DeuRheo WT-108F by Elementis is a non-ionic synthetic associative thickener (NiSAT) or rheology modifier for aqueous applications to increase medium shear viscosity and provide good flow and...view more

Applications

DeuRheo WT-204

Elementis

DeuRheo WT-204 is an associative thickener or rheology modifier based on polyether polyurethane. It shows good film build, gloss and water-resistance. It is easy to handle. It provides increase in...view more

Applications

Disponer W-18

Elementis

Disponer W-18 is a non-ionic, water-borne wetting and dispersing agent by Elementis. Also functions as an anti-floating and anti-flooding agent as well as emulsion stabilizer. Designed for...view more

Applications

Disponer W-518

Elementis

Disponer W-518 is a low foaming polymeric dispersing agent by Elementis. Designed for pigments and extenders used in water-borne coatings, emulsion paints and latex. It reduces viscosity of millbase...view more

Applications

Coatings>Waterborne

DueRheo WT-102

Elementis

DueRheo WT-102 by Elementis is an associative rheology modifier-based on polyether polyurethane. It provides high viscosity at low shear rate and higher thixotropy. It has less effect on gloss and...view more

Applications

Hi-Mar® DFC-108

Elementis

在矿物油混合的疏水性二氧化硅。一个行为s an effective foam control agent. It is particularly effective in flat, semi-gloss and high gloss paints because it provides rapid bubble break at...view more

Applications

Hi-Mar® DFC-163

Elementis

Emulsion of mineral oil, water, and hydrophobic silica. Acts as a defoamer. It disperses quickly in most systems, providing rapid bubble break during processing and application. Hi-Mar® DFC-163...view more

Applications

Hi-Mar® DFC-38

Elementis

Mineral oil based blend of hydrophobic silica and other foam breaking agents. Acts as an effective defoamer. Imparts excellent foam control in paints and coatings. It is particularly effective in...view more

Applications

Hi-Mar® DFC-17

Elementis

Organic/Reacted Silica. Acts as a strong, non-dispersible defoamer/anti-foaming agent. Compatible with vinyl/acrylic and 100% acrylic resins. Primarily recommended for waterborne architectural (flat...view more

Applications

...

Hi-Mar® DFC-19

Elementis

Organic/Reacted Silica. Acts as a defoamer/anti-foaming agent. Can cause gloss reduction. It is silicon-free. Compatible with vinyl/acrylic, 100% acrylic, styrene/acrylic and alkyd/urethane resins...view more

Applications

...

Hi-Mar® DFC-21

Elementis

Organic/reacted silica. Acts as an effective, dispersible defoamer/anti-foaming agent. Compatible with vinyl/acrylic-, 100% acrylic- and styrene/acrylic resins. Recommended for use in waterborne...view more

Applications

...

Hi-Mar® DFC-31

Elementis

一个行为s a silica-free, water dispersible defoamer/anti-foaming agent. It is highly effective in formulations sensitive to surface defects such as fisheyes. Compatible with vinyl/acrylic-, 100%...view more

Applications

Hi-Mar® DFC-39

Elementis

Organic/reacted silica. Acts as a water dispersible defoamer/anti-foaming agent. Compatible with vinyl/acrylic, 100% acrylic, elastomeric and styrene/acrylic resins. Recommended for use in...view more

Applications

...

Hi-Mar® DFC-503

Elementis

Organic/metallic stearate. Acts as a silicone-free, water dispersible defoamer/anti-foaming agent. Exhibits fast knock down. Can cause gloss reduction. Compatible with vinyl/acrylic-, 100% acrylic...view more

Applications

...

Hi-Mar® DFC-60

Elementis

Blend of glycols and organo modified polydimethylsiloxanes. Acts as a defoamer. It is very efficient in destabilizing both macro and micro foam. It has a very good persistency and does not interfere...view more

Applications

...

Hi-Mar® S-609

Elementis

Water-based emulsion of polysiloxanes and organomodified polysiloxanes. Acts as a dispersible defoamer. Suitable for use with a wide variety of water-based resin systems. Included in these are pure...view more

Applications

...

Hypomer FX-2050

Elementis

Hypomer FX-2050 is acrylic polyol by Elementis. Exhibits rapid drying, good adhesion on primer and plastic substrates. Hypomer FX-2050 is used in car refinish, plastic-, metallic- and wood...view more

Applications

Hypomer FX-2060A

Elementis

丙烯酸多元醇。Exhibits fast drying, good adhesion on primer and to plastic substrates. Used in car refinish, engineering machine- and plastic- coatings...view more

Hypomer FX-2060D

Elementis

丙烯酸多元醇。Exhibits fast drying, good adhesion on primer and to plastic substrates. Used in car refinish, engineering machine- and plastic- coatings...view more

Hypomer FX-2460A

Elementis

丙烯酸多元醇。塑料底材的附着力好substrates, excellent weathering and yellowing resistance. Used in plastic coatings and exterior applications...view more

Hypomer FX-2820

Elementis

丙烯酸多元醇。塑料底材的附着力好substrates, excellent weathering and yellowing resistance. Used in exterior coatings and automobile refinishes...view more

Hypomer FX-2860A

Elementis

丙烯酸多元醇。Exhibits high gloss, good hardness, rapid drying, fast curing, solvent resistant and good film build. Used in automobile refinishes, motorcycle- and wood- coatings...view more

Hypomer FX-3060

Elementis

丙烯酸多元醇。Exhibits low viscosity, high film build, gloss and DOI. Possesses high curing speed and good pigment wetting. It is soluble in toluene, xylene, ethyl acetate, n-butyl acetate, methyl...view more

Hypomer FX-4365

Elementis

丙烯酸多元醇。Exhibits high film build, gloss & DOI, good leveling and impact resistance. It is soluble in toluene, xylene, ethyl acetate, n-butyl acetate, methyl ethyl ketone and propyl glcol...view more

Levaslip 455

Elementis

Levaslip 455 by Elementis is a slip, flow/ leveling and anti-blocking agent. Shows good compatibility, recoatability and slipping performance. Designed for water- and solvent-based coatings and...view more

Applications

Levaslip 495

Elementis

Levaslip 495 by Elementis is a silicone-free flow and leveling agent used in solvent-based coatings. It improves foam-releasing and has no side-effects on the inter-coat. It is light stable...view more

Applications

Coatings>Solvent-based

Levaslip 879

Elementis

Levaslip 879 by Elementis is a non-aqueous slip, leveling and wetting agent. Designed for 2K PU, NC lacquer and water-borne coatings. Exhibits lower surface tension, reduces coefficient of friction...view more

Applications

Levelol 837

Elementis

Levelol 837 by Elementis is a light stable, hydrolysis resistant flow and leveling agent. Designed for solvent-based coatings. Exhibits good recoatability and substrate wettablility. It does not...view more

Applications

Coatings>Solvent-based

Levelol 839

Elementis

Levelol 839 by Elementis is an aromatic-free flow and leveling agent. Suitable for PU, epoxy and acrylic systems. Designed for solvent-based baking paints and coil coatings. Exhibits good...view more

Applications

...

Levelol W-469

Elementis

Levelol W-469 by Elementis is an excellent substrate wetting agent. Designed for water-borne coatings, inks and leather finishes. It reduces surface tension and offers rapid spreading. Recommended...view more

Applications

M-P-A® 2000 X

Elementis

High efficiency, pourable organic rheological additive used as an antisettling agent in industrial and trade sales solvent based coatings provides superior control of pigment settling at low...view more

Applications

M-P-A® 4020 BA

Elementis

也许不久,不含水的有机rheological additive used to provide highly efficient control of pigment settling in HAPS-free solvent based coatings. It provides pigment suspension at low additive...view more

Applications

M-P-A® 4020 X

Elementis

Highly stable, moisture-free, high efficiency, pourable organic rheological additive used as an antisettling agent in industrial and trade sales solvent based coatings. It provides little or no...view more

Applications

NUOSPERSE® 1

Elementis

NUOSPERSE® 1 by Elementis acts as a dispersing, wetting and stabilizing agent. Efficiently wets and deflocculates most organic and inorganic pigments and then stabilizes the finished dispersion to...view more

Applications

...

NUOSPERSE® 2000

Elementis

VOC free, polymeric, surface active carrier/humectant for VOC and APE free pigment dispersions. Reduces the tendency of the colorant to dry out during storage or application. Offers good water...view more

Applications

Coatings>Waterborne

NUOSPERSE® 2006

Elementis

NUOSPERSE® 2006 by Elementis is organic solvent-free, anionic, surface active compound. Acts as a wetting agent in aqueous as well as organic solvent borne systems. Highly effective multi-purpose...view more

Applications

...

NUOSPERSE® 2008

Elementis

NUOSPERSE® 2008 by Elementis is liquid polymeric multi-functional surfactant. It is a unique solvent-free pigment dispersing agent and also as a wetting agent for use in no-VOC paints and pigment...view more

Applications

...

NUOSPERSE® 3100

Elementis

NUOSPERSE® 3100 by Elementis is an organic solvent- and APEO-free, anionic, surface active compound. Acts as a dispersing agent. It is a yellowish clear liquid. Suitable for the production of...view more

Applications

NUOSPERSE® 3200

Elementis

NUOSPERSE® 3200 by Elementis is based on hydrophobic polymers emulsified in water. Acts as a humectant. It is a VOC- and APEO-free product available as milky white liquid. Offers an environmentally...view more

Applications

NUOSPERSE® 657 NA

Elementis

NUOSPERSE® 657 NA by Elementis is a dispersing agent and is highly effective in various types of organic and inorganic pigments. It has been recommended for use in a wide range of high-performance...view more

Applications

...

NUOSPERSE® 657 RD

Elementis

NUOSPERSE® 657 RD by Elementis is wetting and dispersing agent. Offers improved stability, shorter grinding time, good coloring & covering properties and low viscosity of the grinding paste...view more

Applications

NUOSPERSE® 757

Elementis

NUOSPERSE® 757 by Elementis is a modified alkyd resin-based dispersing and wetting agent. It shortens the grinding time and improves color strength, stability & hiding power of the paint. Contains a...view more

Applications

...

NUOSPERSE® 9850

Elementis

A polymeric dispersing agent highly effective for carbon black and most types of organic pigments and inorganic pastes. It is recommended for use in a wide range of high-performance solvent-borne...view more

Applications

...

NUOSPERSE® FA 115

Elementis

NUOSPERSE® FA 115 by Elementis is wetting agent. An additive to improve the incorporation of universal tinting pastes into the base dispersion paint. When added to the white base dispersion paint...view more

Applications

Coatings

NUOSPERSE® FA 182

Elementis

NUOSPERSE® FA 182 by Elementis is anionic, highly effective, multi-functional wetting and dispersing agent. Used for water-based systems such as dispersion and alkyd paints and as a conductivity...view more

Applications

...

NUOSPERSE® FA 192

Elementis

NUOSPERSE® FA 192 by Elementis is a wetting and dispersing agent for pigments in plasticizer and universal tinter. Improves the wetting and dispersion of pigments in plasticizer systems, such as...view more

Applications

NUOSPERSE® FA 196

Elementis

NUOSPERSE® FA 196 by Elementis is an anionic, highly concentrated liquid pigment dispersing agent for carbon black and organic pigment. It is suitable for thermoplastic acrylic systems and as an...view more

Applications

...

NUOSPERSE® FA 601

Elementis

NUOSPERSE® FA 601 by Elementis is an anionic, liquid wetting and dispersing agent effective for both organic and inorganic pigments. Properties such as opacity, gloss, colorr strength and brightness...view more

Applications

NUOSPERSE® FA 620

Elementis

NUOSPERSE® FA 620 by Elementis is wetting and dispersing agent for the manufacture of highly concentrated, low viscous aqueous pigment dispersions. Exhibits strong adsorption on wide range of...view more

Applications

NUOSPERSE® FA 640

Elementis

一种阴离子磨vehicle for pigments designed for formulating low hazard universal colorants, and a highly concentrated liquid dispersing agent designed for formulating low viscosity, stable...view more

Applications

Coatings>Waterborne

NUOSPERSE® FK 329

Elementis

A liquid corrosion inhibitor and a cationic pigment dispersant for non-aqueous systems. Improves the corrosion resistance properties, and the stability of the pigments. Causes a slight retardation...view more

Applications

NUOSPERSE® FN 1566

Elementis

壬基苯酚乙氧基化物表面活性剂。作为兼容ibilizer and as wetting agent for pigments in aqueous coatings, as stabilizer in emulsion paints, as dispersing agent, and as an emulsifier...view more

Applications

NUOSPERSE® FN 211

Elementis

NUOSPERSE® FN 211 by Elementis acts as a wetting agent and dispersing agent. It is alkyl phenol ethoxylate-free, APE-free, non-ionic, zero-VOC and has low odor. Improves the storage stability of the...view more

Applications

Coatings>Waterborne

NUOSPERSE® FN 260

Elementis

Phenol-free, nonionic wetting agent and emulsifier. Designed to replace traditionally used alkyl phenol ethoxylates. Offers very good pigment wetting, stabilizing and emulsifying properties...view more

Applications

Coatings

NUOSPERSE® FN 265

Elementis

NUOSPERSE® FN 265 by Elementis is alkylphenol-free nonionic wetting agent and emulsifier, designed to replace the traditionally used alkyl phenol ethoxylates, in the paint industry. May be...view more

Applications

Coatings

NUOSPERSE® FN 267

Elementis

NUOSPERSE® FN 267 by Elementis is alkylphenol-free nonionic wetting agent and emulsifier, designed to replace the traditionally used alkyl phenol ethoxylates, in the paint industry, may be classified as a...view more

Applications

Coatings>Waterborne

NUOSPERSE® FN 270

Elementis

NUOSPERSE® FN 270 by Elementis is an alkylphenol ethoxide-free and labelling-free, universal nonionic grade. Acts as a pigment wetting and dispersing agent. Available as nearly odorless...view more

Applications

NUOSPERSE® FX 365

Elementis

NUOSPERSE® FX 365 by Elementis is a polymeric wetting and dispersing agent for use in waterborne coating & ink formulations and pigment pastes. It is APE-free, non-ionic AB-polymer with hydrophilic...view more

Applications

NUOSPERSE® FX 504

Elementis

NUOSPERSE® FX 504 by Elementis is ammonium salt of a polymeric carboxylic acid- based low foaming, polymeric pigment dispersing agent. It works effectively for many hydrophilic pigments and...view more

Applications

NUOSPERSE® FX 508

Elementis

Anionic polymer in water. Acts as a highly effective pigment dispersant for aqueous coatings, including semi-gloss and high gloss emulsion paints and inks. Designed to give optimum efficiency in low...view more

Applications

...

NUOSPERSE® FX 530

Elementis

NUOSPERSE® FX 530 by Elementis is a low molecular weight, sodium neutralized, anionic, acrylic polymer solution (carrier solvent being water). Acts as a pigment dispersant. Available as low odor...view more

Applications

NUOSPERSE® FX 535

Elementis

NUOSPERSE® FX 535 by Elementis is a sodium neutralized, anionic, acrylic polymer solution (carrier solvent being water). Acts as a dispersant. Available as excellent, all-purpose, low foaming, low odor...view more

Applications

...

NUOSPERSE® FX 543

Elementis

NUOSPERSE® FX 543 by Elementis is a sodium neutralized, anionic, acrylic polymer solution (carrier solvent being water). Acts as a dispersant. Available as an excellent, all-purpose, low foaming...view more

Applications

...

NUOSPERSE® FX 575

Elementis

NUOSPERSE® FX 575 by Elementis is an anionic copolymer grade. Acts as a dispersant. Available as an excellent, all-purpose, low foaming, low odor, easy to use, clear to translucent liquid. Exhibits...view more

Applications

...

NUOSPERSE® FX 590

Elementis

NUOSPERSE® FX 590 by Elementis is a polyacrylate (partially neutralized sodium salt of polyacrylic acid) grade. Acts as a dispersing agent. It is available as a low foaming, pale-yellow liquid that...view more

Applications

Coatings>Waterborne

NUOSPERSE® FX 600

Elementis

Multi-functional polymer, free of organic solvents. Acts as a highly effective pigment dispersing agent for use in waterborne coatings. Ensures a strong interaction with a wide range of pigments...view more

Applications

...

NUOSPERSE® FX 603

Elementis

Sodium salt of a polymeric carboxylic acid. Acts as a low-foaming pigment dispersing agent for aqueous systems. Counter-acts pigment flocculation in weak acid, neutral and strongly alkyline mediums...view more

Applications

NUOSPERSE® FX 605

Elementis

NUOSPERSE® FX 605 by Elementis is sodium salt of a polymeric carboxylic acid-based low-foaming pigment dispersing agent for aqueous systems. Counter-acts pigment flocculation in weak acid, neutral...view more

Applications

NUOSPERSE® FX 609

Elementis

Basic salt of a polymeric carboxylic acid. Acts as a pigment dispersing agent designed for use in filler/pigment concentrates. Ensures extremely stable pigment dispersions for use in aqueous...view more

Applications

NUOSPERSE® FX 610

Elementis

NUOSPERSE® FX 610 by Elementis is a VOC-free, multi-functional polymer. Acts as a dispersing agent. It is available as a colorless to light yellow, clear or slightly hazy liquid. Its...view more

Applications

...

NUOSPERSE® FX 631

Elementis

NUOSPERSE® FX 631 by Elementis is a sodium salt of a hydrophobic copolymer. Acts as a dispersing agent. It is available as a clear, pale, yellow liquid. Suitable for paints and inks. Complies with...view more

Applications

NUOSPERSE® FX 665

Elementis

NUOSPERSE® FX 665 by Elementis is an ammonium salt of a hydrophobic copolymer-based dispersing agent. Provides improved water resistance, corrosion resistance, water spot resistance and early...view more

Applications

...

NUOSPERSE® FX 9086

Elementis

Polymeric surfactant dissolved in methoxy propyl acetate. Acts as a pigment dispersing agent designed for use in high quality pigment pastes and provides extremely stable pigment dispersions for use...view more

Applications

...

NUOSPERSE® W-22

Elementis

NUOSPERSE® W-22 by Elementis is highly effective wetting and dispersing agent in aqueous systems. Offers rapid pigment wetting, increased mill output and maximum color development. Stabilizes the...view more

Applications

NUOSPERSE® W-28

Elementis

NUOSPERSE® W-28 by Elementis is highly effective wetting and pigment dispersing agent. Stabilizes the finished dispersion to prevent flocculation and viscosity drift. Offers rapid pigment wetting...view more

Applications

NUOSPERSE® W-44

Elementis

APE-Free, multi-functional, wetting and pigment dispersing agent for use in waterborne systems. Can be used with all types of pigments to help provide full color development and maximum production...view more

Applications

NUOSPERSE® XL 210

Elementis

NUOSPERSE® XL 210 by Elementis acts as a dispersing agent and emulsifier. It is available as an amber colored liquid. Reduces surface tension and solubilizes water in low polarity solvents. Suitable...view more

Applications

NUOSPERSE® XL 220

Elementis

NUOSPERSE® XL 220 by Elementis acts as a dispersing agent and emulsifier. It is available as a clear liquid. Exhibits rapid pigment wetting and ease of incorporation. Suitable for trade sales alkyd...view more

Applications

Nalzin® FA 179

Elementis

Nalzin® FA 179 by Elementis is a corrosion inhibitor for aqueous paint systems to counteract the formation of flash-rust. It is also suitable for application as an inhibitor against the formation of...view more

Applications

...

Nalzin® FA 379

Elementis

Is a is nitrite-free most effective liquid corrosion inhibitor for waterborne coatings. It is a specially formulated film-forming inhibitor based on an organic zinc complex and a nitrogen compound...view more

Applications

Nalzin® FA 579

Elementis

Is a nitrite-free liquid corrosion inhibitor for aqueous coatings and counteracts flash rusting and can-corrosion, emulsified in water it can also used as a temporary rust inhibitor. Also used as a...view more

Applications

Nuocure® Co 10%

Elementis

Cobalt ions based drier. Used for aqueous alkyd systems. Contains special dispersing agents. Provides very good drying properties and very good stability. Use level: 0.6-1.2% on solid resin...view more

Applications

Nuvis® BEZ 75

Elementis

Can be used to fight settling and sagging in most non-aqueous coatings as oxidativily drying alkyd, alkyd-melamine, acrylic, nitro-cellulose, chlori-nated rubber and epoxy coatings and high-solid...view more

Applications

...

Nuvis® FX 1010

Elementis

Polyurethane thickener. Offers improved weathering, flow and levelling characteristics. Shows excellent spatter resistance and increases film thickness. Used in emulsion paints...view more

Applications

...

Nuvis® FX 1025

Elementis

VOC-free, low/medium and high shear nonionic hydrophobic associative urethane thickening agent in water/glycol. Used in aqueous gloss and flat emulsions/dispersions based on homo-, co-, and most...view more

Applications

Coatings>Waterborne

Nuvis® FX 1035

Elementis

Polyurethane thickener. Provides long-term viscosity stability. Exhibits improved flow and levelling characteristics. Used as the sole thickener in all types of dispersion paints including high PVC...view more

Applications

Nuvis® FX 1050

Elementis

Polyurethane thickener. Offers improved weathering, flow and levelling characteristics. Possesses higher film build, opacity and non-plastic flow. Used in emulsion paints and waterborne decorative...view more

Applications

...

Nuvis® FX 1070

Elementis

No-VOC, rheology modifier. Offers high-shear viscosity. Exhibits improved weathering, brushability and flow and levelling. Possesses higher film build low range of polydispersibility and less...view more

Applications

Nuvis® FX 2050

Elementis

Polymeric thickening agent. Easy to incorporate and does not need a minimum production temperature and is seeding resistant. Minimizes false body effects. Used in conjunction with high solid and...view more

Applications

...

Nuvis® FX 2060

Elementis

Polyamide. Used as an anti-settling, anti-sagging and gelling agent for solvent based coatings such as oxidativily drying alkyd, alkyd-melamine, acrylic, nitrocellulose, chlorinated rubber and epoxy...view more

Applications

...

Nuvis® FX 2130

Elementis

Polymeric thickening agent. Used in industrial coatings. Offers good thickening properties. Provides anti-sagging, anti-settling and good levelling. Possesses thixotropic behaviour and no false body...view more

Applications

POST–4™

Elementis

A complex derivative of castor oil. Used as an antisettling agent for solvent based coatings. Can be added at any point in the paint making procedure. Provides sag and suspension control. It does...view more

Applications

RHEOLATE CVS® -10

Elementis

RHEOLATE CVS® -10 by Elementis is a non-ionic associative rheology modifier for waterborne paints. Exhibits good viscosity stability upon colorant addition, excellent balance of sag resistance & flow and...view more

Applications

RHEOLATE CVS® -7

Elementis

RHEOLATE CVS®-7 by Elementis is a non-ionic associative rheology modifier for waterborne paints. Available as a mid-shear hazy liquid. Contributes some high-shear (ICI) viscosity. Also, it is...view more

Applications

RHEOLATE CVS® 15

Elementis

Polyurethane solution in water. Acts as an efficient low-shear non-ionic synthetic associative thickener (NiSAT) with reduced viscosity loss upon tinting. It is a next generation color viscosity...view more

Applications

...

RHEOLATE CVS® FX 1080

Elementis

RHEOLATE CVS® FX 1080 by Elementis is a hydrophobic polyether urethane polymer in a mixture of solvents. Acts as a thickening agent. Improves anti-settling and sag resistance by increasing mid and low shear...view more

Applications

Coatings>Waterborne

RHEOLATE® 150

Elementis

Acrylic emulsion in water. Acts as a cost effective and versatile alkali swellable thickener in an easy to use emulsion form. Is APEO (alkyl phenol ethoxylate) free and solvent free. Provides high...view more

Applications

...

RHEOLATE® 175

Elementis

RHEOLATE® 175 by Elementis is an acrylic emulsion in water. It acts as a rheological agent. It is a cost effective, easy -to-use hydrophobically modified alkali-swellable emulsion (HASE). It is free...view more

Applications

RHEOLATE® 2000

Elementis

RHEOLATE® 2000 by Elementis is a highly efficient, VOC-free, pourable liquid anti-settling rheology modifier for water-borne systems including water-reducible alkyd, acrylic, epoxy and urethane resin...view more

Applications

...

RHEOLATE® 2001

Elementis

Is a fine particle size high efficiency pourable liquid antisettling agent for use in water-reducible coating and ink systems. Used in systems having pH higher than 6.0, excellent results are...view more

Applications

...

RHEOLATE® 210

Elementis

Low odor, VOC-free, polyether urea polyurethane solution in a mixture of water and wetting agent. Acts as an associative thickener for emulsion paints and water-borne systems. Suitable for use in...view more

Applications

...

RHEOLATE® 212

Elementis

VOC-free polyether polyurethane. Acts as an associative flow modifier and thickener for aqueous applications. Can be used alone or in combination with a co-thickener. Provides high efficiency...view more

Applications

...

RHEOLATE® 216

Elementis

Non-spattering, non-misting, pH insensitive and independent, VOC-free polyether urea polyurethane polymer. Acts as an associative thickener for VOC-free waterborne coatings. Provides highly...view more

Applications

...

RHEOLATE® 244

Elementis

RHEOLATE® 244 by Elementis is 25% solids dispersion of polyether urea polyurethane-based associative rheology modifier. It is designed for use in waterborne paints and inks containing small...view more

Applications

...

RHEOLATE® 255

Elementis

RHEOLATE® 255 by Elementis is a polyurethane solution in a mixture of water/diethylene glycol ether. It acts as an associative thickener designed for use in conventional emulsion systems. It provides...view more

Applications

RHEOLATE® 266

Elementis

RHEOLATE® 266 by Elementis is a non-spattering, non-misting, pH insensitive and independent polyether urea polyurethane-based associative thickener for waterborne systems. Provides highly efficient...view more

Applications

...

RHEOLATE® 278

Elementis

RHEOLATE® 278 by Elementis is a polyurethane solution in a mixture of water/diethylene glycol ether. Acts as an associative thickener designed for use in paints containing small-particle-size emulsions...view more

Applications

...

RHEOLATE® 278 TF

Elementis

RHEOLATE® 278 TF by Elementis acts as a thickener. It is free from APEO (alkyl phenol ethoxylate) and tin. Available as a cloudy white liquid. Suitable for decorative gloss and satin-gloss latex paints...view more

Applications

RHEOLATE® 288

Elementis

RHEOLATE® 288 by Elementis is a non-ionic associative, highly efficient thickener for waterborne haze-free architectural and industrial coatings. It is a polyether polyurethane solution in a mixture of...view more

Applications

...

RHEOLATE® 299

Elementis

Polyether polyurethane dispersion in a mixture of water and diethylene glycol monobutyl ether, is APE-free, tin-free and pH dependent. Acts as a highly efficient associative thickener. Provides...view more

Applications

...

RHEOLATE® 300

Elementis

High performance urethane free nonionic associative thickener. Used in high quality latex paints, high gloss, semi-gloss and flat interior and exterior, and inks. Improves color acceptance and color...view more

Applications

RHEOLATE® 300 D

Elementis

RHEOLATE® 300 D by Elementis is a polyol-based associative thickener for use in conventional latex and water-reducible systems. It is an alternative to traditional urethane-based thickeners. Improves...view more

Applications

RHEOLATE® 310

Elementis

Low-odour, VOC-free polyether polyol solution. Acts as an associative rheology modifier for use in conventional latex and water-reducible systems. Suited ideally for low- and VOC-free formulations...view more

Applications

...

RHEOLATE® 310 D

Elementis

RHEOLATE® 310 D by Elementis is a polyether polyol solution. Acts as a rheological agent. Available as a low odor, VOC-free, clear to a slightly hazy viscous liquid. It is a non-ionic associative...view more

Applications

RHEOLATE® 350 D

Elementis

RHEOLATE® 350 D by Elementis is a non-ionic polyether polyol (50% active) solution. Acts as a rheological agent and associative thickener. Available as a low odor, VOC-free, clear, colorless to light...view more

Applications

RHEOLATE® 450

Elementis

Hydrophobically modified alkali swellable emulsion (HASE). Acts as a unique thickener for latex paints and other water based systems. Offers mid and high shear rate viscosity, very good package and...view more

Applications

...

RHEOLATE® 465

Elementis

RHEOLATE® 465 by Elementisis a proprietary HASE (hydrophobically modified alkali swellable emulsion). Acts as a rheological agent and thickener. Available as a milky white liquid. Demonstrates both...view more

Applications

RHEOLATE® 475

Elementis

Solvent-free, hydrophobically modified alkali-soluble emulsion (HASE). Acts as a rheology modifier. Provides the balance of properties not typically found in acrylic chemistries such as excellent...view more

Applications

RHEOLATE® 644

Elementis

Solvent-free, APE-free, tin-free, 25% solution of polyether urea polyurethane (HEUR). Acts as an associative rheology modifier designed for use in latex paints, waterborne coatings, and in low PVC...view more

Applications

...

RHEOLATE® 655

Elementis

无溶剂、APE-free无锡,聚醚尿素polyurethane (HEUR). Acts as an associative rheology modifier designed for use in low VOC latex systems, latex paints and other waterborne coatings...view more

Applications

...

RHEOLATE® 658

Elementis

RHEOLATE® 658 by Elementis is a polyurethane solution in water. Acts as a thickener. Available as a mid-shear opaque liquid. It is a nonionic synthetic associative thickener designed for improving the...view more

Applications

...

RHEOLATE® 666

Elementis

无溶剂、APE-free无锡,聚醚尿素polyurethane (HEUR). Acts as an associative rheology modifier designed for use in low VOC latex systems, latex paints and other waterborne coatings...view more

Applications

...

RHEOLATE® 678

Elementis

无溶剂、APE-free无锡,聚醚尿素polyurethane (HEUR). Acts as an associative rheology modifier designed for use in waterborne paints based on latex systems. Provides superior...view more

Applications

...

RHEOLATE® CVS-11

Elementis

Is a 20% active mid-shear (KU) and high-shear (ICI) non-ionic associative thickener. It is APEO and tin-free. Possesses excellent balance of sag resistance, flow and good KU efficiency. Has good...view more

Applications

...

RHEOLATE® FX 1010

Elementis

RHEOLATE®1010年外汇比较聚醚聚urethane-based high-efficiency associative thickener. It also acts as a binding agent. Improves weathering, rheological and leveling properties of aqueous...view more

Applications

RHEOLATE® FX 1070

Elementis

No VOC, clear liquid. Acts as an associative thickening agent for aqueous coatings. Increases the high-shear viscosity, resulting in more Newtonian behaviour. Improves weatherability, film build...view more

Applications

RHEOLATE®HX 6010

Elementis

Polyurethane solution in water. Acts as an efficient high-shear non-ionic synthetic associative thickener (NiSAT). It is designed as a Newtonian high shear (ICI) builder. Shows an excellent balance...view more

Applications

...

Serdas® GBR

Elementis

Liquid defoamer. Used in emulsion paints. Offers very good stability. Provides good emulsifying properties. Possesses low viscosity and low emulsifiability in water. Offers longterm effectivity...view more

Slip-ayd® FS 444

Elementis

Is a liquid additive for increasing surface slip and mar resistance of water based and polaric solvent based paints. It is recommended for use in car finishes, wood varnishes, printing inks as well...view more

Applications

...

Slip-ayd® SL 94

Elementis

一个中等粒径分散软synthetic wax that provides exceptional slip and mar resistance. Solvent selection allows the product to be used in a wide range of aqueous and solvent...view more

Applications

...

THIXATROL® 18

Elementis

A rheological additive is a high-efficiency easy-to-use organic product specially designed to provide excellent rheology and mist control in paste inks. Used in paste inks including offset, heatset...view more

Applications

...

THIXATROL® 289

Elementis

Highly efficient, low-molecular-weight polyester polyamide. Used to control thermal sag and pigment suspension in high solids, low-molecular-weight-resin systems such as polyester stoving enamels...view more

Applications

...

THIXATROL® BEZ 75

Elementis

THIXATROL® BEZ 75 by Elementis is a non-aqueous rheology modifier...view more

Applications

Coatings Markets>General Industrial /Maintenance>Primers

THIXATROL® LT 1207

Elementis

Liquid, easy-to-use organic product. Acts as a highly efficient rheological additive designed to provide very good rheology control in polyester and acrylic resin based non-aqueous systems. Offers...view more

Applications

...

THIXATROL® LT 1208

Elementis

Liquid, easy-to-use organic product. Acts as a highly efficient rheological additive designed to provide very good rheology control in polyester and acrylic resin based non-aqueous systems. Offers...view more

Applications

...

THIXATROL® SR

Elementis

Low-molecular-weight polyester amide. Acts as a non-seeding, highly efficient, liquid, organic rheological additive for aromatic and some oxygenated solvent-based systems. Provides viscosity...view more

Applications

...

THIXATROL® TSR

Elementis

Seed-resistant, highly efficient, low-molecular-weight polyamide. Used to provide thixotropic viscosity and sag control for conventional and VOC compliant aliphatic and some high solids aromatic...view more

Applications

...

THIXATROL® UV 1104

Elementis

Polyester. Acts as a rheological additive designed for use in both oligomer and monomer based formulations that contain pigments and fillers. Smaller particle size grades generally result in...view more

Applications

...

RHEOLATE® FX 1050 Discontinued

Elementis

Organic-solvent-free high-efficiency polyurethane thickener. Used in many aqueous systems such as emulsions, dispersions and emulsion paints. RHEOLATE® FX 1050 by Elementis is recommended for a wide range...view more

Applications