Bayoxide® Z Active by Borchers (Milliken) is zinc oxide which improves corrosion protection behavior and hardness. It increases through drying for additives and topcoats. Bayoxide® Z Active reduces...view more

Borchi® Gel Thixo 2 by Borchers is a thickener for solvent-based lacquers and paints. It enhances the thixotropic character of paints with solvents of non-polar or weakly polar nature. It reduces...view more

Ti-Pure™ R-902+ by Chemours is a multi-purpose rutile titanium dioxide manufactured by the chloride process. Shows excellent balance of chalk resistance, hiding and gloss with outstanding dispersion...view more

1,4 CHDA is 1,4-cyclohexanedicarboxylic acid distributed by DKSH. It is a special monomer used in the polyester resin synthesis for industrial, coil coating and enamels. Offers yellowing resistance...view more

AMPARMOR™ 1043 distributed by DKSH is a two-part system of microcapsules. It contains a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/ enhancers and adhesion...view more

Luna-ADH由大昌华嘉功能ns as a chain extender in water-borne polyurethane systems. It is commonly used in combination with Luna-DAAM. This product is available in Europe, Asia and North...view more

HEUCOSIN™ Black G 5205 by Heubach is a black colored lead chromate-free pigment preparation. It offers heat resistance, excellent weather-, alkali- and acid fastness. HEUCOSIN™ Black G 5205 is recommended for...view more

HEUCOSIN™ Green G 6861 by Heubach is a green-colored pigment preparation. It is recommended for water-based and solvent-based coatings. HEUCOSIN™ Green G 6861 offers acid-, alkali-, weather fastness and heat resistance...view more

MONASTRAL™ Green 6Y-C by Heubach is a high performance, Cu-phthalocyanine-based organic pigment. It exhibits excellent acid-, alkali-, water- and heat-resistance. It shows good overpainting-, light- and...view more

MONASTRAL™ Green GBX-C by Heubach is a high performance Cu-phthalocyanine-based organic pigment. It shows good overpainting-, light- and weather fastness. It exhibits excellent acid-, alkali-, water...view more

MONASTRAL™ Green GN-C by Heubach is a high performance, Cu-phthalocyanine-based organic pigment. It exhibits excellent acid-, alkali-, water- and heat-resistance. It shows good overpainting-, light- and...view more

Gasil® 114 by PQ Corporation is a synthetic amorphous silica-based matting agent. It is also used as a high efficiency anti-blocking agent in linear low density polyethylene (LDPE) film. It is...view more

Gasil® 200DF by PQ Corporation acts as a water scavenger in aluminum paints. It is a particle-sized controlled product for smooth coatings for drafting films. It offers excellent ‘tooth’ for pencil...view more

Gasil® 23D by PQ Corporation acts as a viscosity modifier, thickening- and matting agent. It is based on highly efficient, fine particle size silica. It is suitable for use in printing inks and...view more

Gasil® GM2 by PQ Corporation is a synthetic amorphous silica-based matting- and anti-caking agent. It's structure and particle size make it ideally suited to withstand mechanical breakdown during...view more

Gasil® HP340M by PQ Corporation is a high efficiency, general purpose matting agent based on synthetic amorphous, wax-treated silica. Offers good dispersibility and suspension properties. It is...view more

ADDITOL® VXW 6206 by allnex is a water-emulsifiable, ethoxylate-free nonylphenyl combination drier of cobalt, lithium and zirconium. It may be added as siccative to all water-borne oxidatively...view more

ADDITOL® VXW 6235 by allnex is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as emulsion paints, 2-component epoxy systems and flooring...view more

ADDITOL® VXW 6503 N by allnex is a leveling and substrate wetting agent based on polyether-modified polysiloxane for waterborne and solvent-borne paint systems. Offers strong reduction in surface...view more

ADDITOL® XW 6569 by allnex is a modified silicone-based defoamer. It is emulsifier-free with no influence on rheology modifiers and resin stability. This highly effective grade is easy to...view more

ADDITOL® XW 6575 by allnex is modified polyester acrylate polymer. It is a water-dilutable grinding medium which can be used for color- and shading pigment pastes. It is compatible in air-drying and...view more

PERASE ACTIVATOR HP by Pidilite Industry is a discharging agent for reactive dyed fabric by curing method. This free-flowing powder form is easily mixable with perase discharge paste WCRT and CCRT...view more

Ranipal 2B by Pidilite Industries is a fluorescent whitening agent. It imparts real whiteness to cellulosic fabrics. It effectively removes the yellowness of white fabrics and offers glowing...view more

DYHARD® MCA40 by AlzChem is a special formulated hardener for high gloss epoxy powder coating applications...view more

DYHARD® MCA45 by AlzChem is special formulated hardener for high gloss epoxy powder coating applications...view more

DYHARD® PI by AlzChem is an accelerator for thermosetting epoxy resin systems used in the powder coating industry. This very economical additive is very effective in dosage. It offers medium shelf...view more

Kynar® 741 is a fluorinated thermoplastic homopolymer by Arkema. Exhibits high barrier-, good mechanical and thermomechanical properties. Kynar® 741 is designed for off-shore and painting...view more

Kynar® ADX 111 by Arkema is a heat stabilized polyvinylidene fluoride (PVDF). Suitable for off-shore, painting, powder- and dip coating in fluidized bed. Exhibits high purity, high barrier-, good...view more

Kynar® ADX FLEX 281 is a grafted, light- and heat stabilized polyvinylidene fluoride (PVDF) by Arkema. Designed for metal coating and provides corrosion resistance...view more

Kynar® ADX FLEX 281 G is a grafted polyvinylidene fluoride (PVDF) by Arkema. It is a light- and heat stabilized grade and is used for metal coating. Offers corrosion resistance benefit...view more

Rilsan® D40 NATURAL is a high performance, low density polyamide 11 (PA 11) grade by Arkema. Recommended for coil-, wood- and plastic coatings. Exhibits good dispersion capacity, good impact...view more

Acrawax™ C Powder by Arxada acts as a dispersant and slip additive. It also functions as an anti-blocking and matting agent. Acrawax™ C Powder is designed for inks and coatings applications...view more

Lonzacure® M-CDEA by Arxada acts as a curing agent for epoxides in chemical-resistant coatings. Provides very good dynamics, temperature resistance, low water absorption, and hydrolytic and light...view more

Lonzacure® M-DEA by Arxada is an epoxy curing agent for chemical-resistant coatings. Offers very good chemical stability against acidic and basic reagents, high Tg (up to 200°C in combination with...view more

Adamas® A-100D Alumina Powder by CQV is a white, free-flowing alumina (100%) powder. It is a pearlescent metallic pigment. Exhibits excellent chemical and physical properties as well as great...view more

Adamas® A-620S Dazzling Bronze by CQV is a blend of alumina (69-79%) and iron oxide (21-31%). It is a pearlescent metallic pigment. Exhibits excellent chemical and physical properties as well as...view more

Adamas® A-640K Splendor Copper by CQV is a blend of alumina (52-62%) and iron oxide (38-48%). It is a pearlescent metallic pigment. Exhibits excellent chemical and physical properties as well as...view more

Adamas® A-640S Dazzling Copper by CQV is a blend of alumina (65-75%) and iron oxide (25-35%). It is a pearlescent metallic pigment. Exhibits excellent chemical and physical properties as well as...view more

Adamas® A-660K Splendor Russet by CQV is a blend of alumina (49-59%) and iron oxide (41-51%). It is a pearlescent metallic pigment. Exhibits excellent chemical and physical properties as well as...view more

CAB-O-SIL® CT-1221 by Cabot is high purity, fumed silica designed for powder coatings applications. It is has been treated with hexamethyldisilazane (HMDZ). This treatment replaces many of the...view more

硅石粉®l - 90年由卡伯特是一个亲水,很容易dispersible, untreated fumed silica. Acts as a rheology modifier. Exhibits lowest surface area, high purity, submicron particle size, aggregated...view more

CAB-O-SIL® LM-150 by Cabot is an untreated, low surface area, hydrophilic fumed silica. Acts as a thickener. Imparts a moderate increase in viscosity & reinforcement in liquid and polymer systems...view more

CAB-O-SIL® TS-5022 by Cabot is a hydrophobic, fumed silica with surface treated with hexamethyldisilazane (HMDZ). Acts as a rheology modifier, anti-sagging and flow/ levelling agent. Possesses high...view more

CAB-O-SIL® TS-710 by Cabot is a polydimethylsiloxane (PDMS) modified, low surface area fumed silica. Acts as a thickener. Compatible with epoxy, polyurethane and vinyl ester resins. Provides easy...view more

Calcium carbonate. Acts as a filler. It is a dry powder with high purity and controlled top-cut. Has unique particle shape and narrow particle size distribution. Offers high whiteness, low iron...view more

Calcium carbonate. Acts as a filler. It is a dry powder with high brightness and controlled top-cut. Has high purity, unique particle shape and narrow particle size distribution. Offers high...view more

Calcium carbonate. Acts as a filler. It is a stearic acid coated version of CalciRC 100. Has high purity, unique particle shape and narrow particle size distribution. Offers high whiteness, low iron...view more

Chiguard® 100G by Chitec Technology is hindered amine light stabilizer (HALS) which protects against ultraviolet radiation. Ii is fine-powder grade of Chiguard® CG 100. It acts as an electret and mainly be...view more

Chiguard® 1033 by Chitec Technology is an oxalinide-based UV absorber. It is mainly applied to various solvent-based coating systems. It provides low initial color, strong anti-oxidant ability and high affinity...view more

Chiguard® 1152 by Chitec Technology is a low alkalinity reactable N-OR hindered amine light (HAL) stabilizer. It can chemically bond to polymers with OH groups in the structure. It is non-migrating, resistant...view more

Chiguard® 5228 by Chitec Technology is a benzotriazole-based UV absorber. It applies to powder coating and solvent-based coating system. It provides outdoor weather resistance. It exhibits good system...view more

Chiguard® 5405 by Chitec Technology is a triazine-based UV absorber suitable for powder coating. It offers extra long-term weather resistance. Chiguard® 5405 is used in exterior powder coatings and solvent-borne...view more

Performance additive. Is a dry, white granular powder. Improves the flow, leveling, pigment wetting, color uniformity and surface wetting properties. Reduces the cratering, dry-to-touch time, color...view more

Benathix® by Elementis is a rheological additive an extremely efficient, organically modified smectite clay developed to impart thixotropy to unsaturated polyester laminating resins and gel coats...view more

BENTONE® 54 by Elementis is an organic derivative of bentonite clay. Acts as a rheology modifier. It is a light cream, finely divided powder. Increases viscosity, provides thixotropy, prevents...view more

BENTONE® DS by Elementis is a beneficiated hectorite clay grade. Acts as a rheology modifier. It is a milky-white, soft powder. Improves flow properties & surface quality, improves slump/sag...view more

Silicon dioxide. Acts as a defoamer. It is a micro-fine silica treated with an organic silicone compound. The resultant hydrophobic silica is extremely water repellent and easily dispersed in...view more

Very hard high molecular weight oxidized polyethylene wax. Provides very good resistance to blocking and abrasion. It offers easy incorporation in water and reduces gloss. Used in coatings, inks and...view more

BLUESIL™ PI 2074 by Elkem Silicones is a (tolylcumyl) iodonium tetrakis (pentafluorophenyl) borate. Acts as a cationic photoinitiator. It is compatible with epoxy resins, vinyl ethers or any other...view more

Silcolease® ADD 702 by Elkem Silicones is a white, granular, general purpose emulsion. Acts as a rheology modifier. It is used with SILCOLEASE emulsion systems to improve hold-out of the silicone...view more

ANCAMINE® 2337S by Evonik is modified aliphatic amine. Acts as a latent curing agent for epoxy resins. Provides good adhesion and easy dispersion in liquid resins. Offers very good shelf stability in...view more

Ancamine® 2441 by Evonik acts as a latent curing agent. Offers low temperature activation. Provides high glass transition temperature. Possesses good formulation shelf stability and improved green...view more

ANCAMINE® 2442 by Evonik is modified polyamine. Acts as a latent curing agent for one-component epoxy formulations. Provides a good balance of low temperature activation, good shelf stability and...view more

Nonionic molecule containing a hydrophilic portion. Used in industrial maintenance, wood coatings, DIY wood finishes, paper coatings, printing inks, overprint varnishes. Possesses surface tension...view more

Surfynol®500年代赢创APEO-free硅,wetting agent. This surfactant possesses extended open time and workability. It offers outstanding pigment wetting and prevents pigment...view more

Nubirox 301 by Ferro is calcium strontium phosphosilicate-based anti-corrosive pigment. It improves pigment efficiency. It is alternative to zinc-based pigments and deliver excellent performance in...view more

A-C® 1089 by Honeywell is a high melt temperature, lower viscosity, hard polypropylene (PP) homopolymer. Acts as an excellent internal lubricant. A-C® 1089 is used in paint coatings and inks...view more

A-C® 1172 is a hard polypropylene (PP) homopolymer by Honeywell. It exhibits high melt temperature and high viscosity. A-C® 1172 is used in paints, coatings and inks...view more

A-C® 1810A by Honeywell is a very low viscosity, medium density polyethylene (PE) homopolymer. Used in solvent borne coatings, and in heat-set and liquid solvent borne inks to improve mar and rub...view more

A-C® 316A by Honeywell is a hard, high density, oxidized polyethylene homopolymer with high drop point. Used in overprint varnishes, water borne coatings and inks and polishes to improve surface...view more

A-C® 395A by Honeywell is a high-density oxidized polyethylene homopolymer. It is a hard grade with high drop point. Designed to improve surface properties including mar and abrasion resistance by...view more

高纯镁泥m hydroxide. Represents a halogen free flame retardant with low smoke emission and high thermal stability up to 340°C. Used for coatings...view more

高纯镁泥m hydroxide. Represents a halogen free flame retardant with low smoke emission and high thermal stability up to 340°C. Used for Coated Fabric - PVC plastisols...view more

Aluminum trihydroxide. Acts as a filler, coating pigment and TiO2-extender for the paper and board industry...view more

Aluminum trihydroxide. Acts as a predispersed filler, coating pigment and TiO2-extender for the paper and board industry...view more

Martinal® OL-104 by Huber Engineered Materials is an environmental friendly, halogen-free, inert and fine precipitated aluminium hydroxide. Used as a flame retardant and as a filler in powder...view more

Zinc barium sulfate (Zns. Baso4). It is an inorganic white pigment. Lithopone B301 is produced by precipitation through filtering, heating and quenching. It is much cheaper but still it is mostly...view more

Zinc barium sulfate (Zns. Baso4). It is an inorganic white pigment. Lithopone B311 is produced by precipitation through filtering, heating and quenching. It is much cheaper but still it is mostly...view more

KRATON™ D1101 ESM by KRATON is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. Used in pipe...view more

KRATON™ D1101 KIM by KRATON is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a dusted powder. KRATON™ D1101 KIM is used in...view more

KRATON™ D1116 ESM by KRATON is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as powder dusted with an amorphous silica...view more

KRATON™ D1118 ASM by KRATON is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 33% mass. It is available in powder dusted with amorphous silica form...view more

KRATON™ D1133 KIM by KRATON is a clear, linear block copolymer based on styrene and butadiene with a polystyrene content of 36%. It is supplied in dusted powder form...view more

Hydragloss® is a medium brightness, fine glossing, coating clay. Its fine particle size and excellent flow properties allow for high solids coating and provide excellent glossing properties...view more

Hydragloss® 90 is a high brightness, coating clay by KaMin. Provides excellent glossing properties. Its fine particle size and excellent flow properties allow for high solids coating. Hydragloss® 90...view more

卡闵®2000 c·卡是一个高亮度,smallest particle size, calcined kaolin clay. It is cost-effective. KaMin® 2000C is used in architectural coatings, industrial coatings, wood coatings and...view more

KaMin™ 35 by KaMin is a filler. It is a coarse kaolin with low oil absorption. Designed for extending without thickening. KaMin® 35 is used in water & solvent-borne paints, architectural coatings...view more

KaMin® 70C by KaMin is a high brightness, calcined kaolin clay with extremely low crystalline silica content. KaMin® 70C is used in traffic paints, architectural coatings, industrial coatings and...view more

Exceval® AQ-4104 by Kuraray is a hydrophobically modified polyvinyl alcohol especially designed for the requirements of high water resistance. It shows strong oil and gas barriers e.g. toward...view more

Exceval® HR-3010 by Kuraray is a super hydrophobically modified polyvinyl alcohol. Exhibits high water resistance and strong chemical resistance. It provides good adhesion to metallization as well...view more

Exceval® RS-1713 by Kuraray is a medium hydrophobically modified polyvinyl alcohol especially designed for the requirements of “high water resistance”. It shows strong oil and gas barriers e.g...view more

Exceval® RS-1717 by Kuraray is a medium hydrophobically modified polyvinyl alcohol. Offers excellent water resistance and chemical resistance. Provides good adhesion to metallization as well as...view more

Exceval® RS-2117 by Kuraray is a fully hydrophobically modified polyvinyl alcohol with high water resistance. It offers strong oil and gas barriers e.g. toward oxygen, carbon dioxide and various...view more

Kalama® Sodium Benzoate NF/FCC by LANXESS (previously Emerald Kalama Chemical) is a corrosion inhibitor. It can effectively inhibit corrosion and flash rust in waterborne systems at low...view more

Preventol® A 6-M by Lanxess is a VOC-free dry-film preservative. It is a broad-spectrum algicide which is highly effective against algae found on the surface of coating. It is available in powder...view more

Lorama Protective Colloid 60 (LPC60) is a polysaccharide based natural product. It is a water dispersible non-ionic polymer in the form of a non-hazardous free flowing powder. It is non-toxic and...view more

Lanco™ Flow P 30 by Lubrizol is a modified castor oil wax. Used for powder coatings. Improves flow and levelling. Supports degassing. Offers minimal influence on gloss and wide compatibility...view more

Modified polyethylene wax. Improves scratch and metal mark resistance. Possesses homogeneous particle size distribution. Reduces coefficient of friction. Offers gloss control for a matte or satin...view more

微缩polypropylene-modified聚乙烯蜡. Enhances scratch resistance. Provides very good antiblocking properties. Improves metal mark resistance. Increases resistance to scuffing. Offers...view more