Regulator ZL by Borchers (Milliken) is a stabilizer for solvent-free 2K polyurethane paints. It is highly acidic cation exchanger. The alkaline fillers (may by catalytic action) shorten the...view more

Vinavil K 115 by Vinavil is polyvinyl acetate homopolymer crystal clear solid resin designed for paints. It is used in a variety of applications where high specific adhesion and tight bond are...view more

Vinavil K40 by Vinavil is polyvinyl acetate homopolymer crystal clear solid resin, characterized by specific molecular weight distribution. It is applicable in a variety of applications where high...view more

Vinavil K50 by Vinavil is polyvinyl acetate homopolymer crystal clear solid resin, characterized by specific molecular weight distribution. It is applicable in a variety of applications where high...view more

Vinavil K55 by Vinavil is polyvinyl acetate homopolymer. It is a crystal clear solid resin characterized by specific molecular weight distribution. It is compatible with a wide range of substances...view more

Vinavil Vinavil K60的聚醋酸乙烯酯homopolymer characterized by specific molecular weight distribution. It is crystal clear solid resin used in a variety of applications where high specific...view more

BECKOPOX™ EP 2307w/45WAMP by allnex is a high-molecular epoxy resin (Type 7) dispersion. In combination with suitable crosslinkers (amino or phenolic resins and accelerators), it is possible to...view more

BECKOPOX™ EP 2384w/57WA by allnex is a type 1 solid epoxy resin as aqueous dispersion. It results in rapid drying coating systems for mineral and metal substrates. The shelf life of the BECKOPOX™ EP...view more

BECKOPOX™ EP 2392w/70MP by allnex is a flexibilized, water-emulsifiable, type 1 solid epoxy resin that is diluted in methoxypropanol. This product is used to formulate anticorrosive primers and...view more

BECKOPOX™ EP 301/75X by allnex is unmodified, type 1 epoxy resin with a relatively low melting interval. It is designed for solvent-borne two-component coatings, anti-corrosion primers, additional...view more

BECKOPOX™ EP 384w/53WAMP by allnex is a solid type-1 epoxy resin dispersion. It is also used in combination with water emulsifiable liquid resins for fast drying coatings, preferably for mineral substrates...view more

Priplast™ 3162 by Cargill is a semi-crystalline polyester polyol. It is suitable for polyurethanes and polyurethane dispersions used in demanding coating applications. It provides excellent wetting of...view more

Priplast™ 3172 by Cargill is a semi-crystalline polyester polyol building block. It exhibits low color, excellent stability, enhanced durability and strength. It offers flexibility which allows the...view more

Priplast™ 3192 by Cargill is a semi-crystalline polyester polyol. It is an all-round building block for polyurethanes and polyurethane dispersions in coatings. It shows improved adhesion for improved...view more

Priplast™ 3294 by Cargill is a bio-based, semi-crystalline polyester polyol. It is designed for polyurethane- and industrial coatings. It provides excellent water resistance, superior surface hardness...view more

2,5-Dimethyl-2,5-di-(benzoylperoxy)hexane. Offers the widest range of activity among all the classes of organic peroxides available. Used extensively as initiators in free radical polymerization...view more

Free-radical initiators. Used in the production of acrylic resins for paint and coatings. Offers low molecular weights, narrow polydispersities, high quality results...view more

Free-radical initiators. Used in the production of acrylic resins for paint and coatings. Offers low molecular weights, narrow polydispersities and high quality results...view more

Free-radical initiators. Used in the production of acrylic resins for paint and coatings. Offers low molecular weights and narrow polydispersities, high quality results...view more

Free-radical initiators. Used in the production of acrylic resins for paint and coatings. Offers low molecular weights and narrow polydispersities, high quality, colorless, results...view more

Lonzacure® M-DIPA by Arxada is an epoxide curing agent. Suggested for chemical resistant coatings for construction industry. Provides good dynamics, good hydrolytic stability and low water...view more

由Arxada Lonzacure®M-MIPA固化剂德西gned for epoxides in coatings for the construction industry. Provides good dynamics, good hydrolytic stability and low water absorption in...view more

Lacowax PEO 11 by Ashland is an oxidized polyethylene wax. Used as an anti-blocking agent, lubricant and anti-abrasive in aqueous printing inks. Offers increased degree of oxidation, acid and...view more

Stabileze™ 06 by Ashland is poly(methylvinylether/maleic anhydride decadiene) Crosspolymer. It is soluble in water. Stabileze™ 06 yields clear, aqueous gels that are shear thinning and slightly...view more

Stabileze™ QM by Ashland is a poly(methylvinylether/maleic anhydride decadiene) Crosspolymer. It is a pseudoplastic rheology modifier that yields clear, aqueous gels that are shear-thinning and...view more

亚什兰是N-vinyl-2-caprolactam V-Cap™RC。它accelerates UV curing rates as the reactive diluent. Used in UV-curing inks (silk screening), vinyl flooring, wood- and release coatings. It has...view more

BASF Behenyl Acrylate 1822 F (BEA 1822 F) by BASF is a monofunctional monomer with the characteristic high reactivity of acrylates and a very hydrophobic long-chain pendant group. Used for chemical syntheses because it...view more

Hydroxyethylcaprolactone acrylate forms homopolymers and copolymers. Its copolymers can be prepared with with acrylic acid and its salts, amides and esters, and with methacrylates, acrylonitrile...view more

Behenyl Methacrylate 1822 (BEMA 1822) by BASF is a monofunctional methacrylate with a long, hydrophobic side chain forms homopolymers and copolymers. Copolymers can be prepared with acrylic acid and its salts, amides...view more

Hydroxypropylcarbamate acrylate. A monofunctional acrylates forms homopolymers and copolymers. Its copolymers can be prepared with acrylic acid and its salts, amides and esters, and with...view more

Joncryl® 580 by BASF is 100 % solids acrylic polyol. Exhibits good chemical resistance and hardness. Used in both two-component urethane and acid-cure coatings. Joncryl® 580 by BASF is ideal for...view more

Solid acrylic homopolymer. Used in construction paints, road paints and impregnating primers, gravure & screen inks, overprint varnishes, aerosols, plastic coatings, wood polishes and wax...view more

NeoCryl® B-875 by Covestro is a solid acrylic copolymer. It provides high gloss and good exterior durability. It is suitable for flatted, solvent-based, interior and exterior wall paints. It is also...view more

Corona™ 9 by Croda is a skin-friendly, scratch-resistant and anti-blocking additive. It functions as a water in oil emulsion stabilizer, release aid and gloss enhancer in coatings. It prevents...view more

ECO Brij™ C2 by Croda is a 100% bio-based, non-ionic surfactant. It is used as a versatile co-emulsifier for O/W emulsions wetting agent, dispersing agent and solubilizer. It is produced from...view more

ECO Brij™ S20 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. This hydrolytically stable grade is produced from naturally occurring straight chain stearyl alcohol. It is used as a...view more

Zephrym™ PD 2246 by Croda is a non-ionic polymeric dispersant in medium polarity non-aqueous systems. It offers good temperature and high shear stability. It is suitable for both organic and...view more

Pure methylene diphenyl diisocyanate (MDI). It is BHT-free...view more

TERGITOL™ 15-S-40 by Dow Chemical is a versatile, high performance secondary alcohol ethoxylate (SAE). Acts as a non-ionic surfactant, freeze-thaw controller, dispersing agent, emulsifier. Offers...view more

TERGITOL™ NP-30 by Dow Chemical is a nonylphenol ethoxylate. Acts as a dispersant, wetting agent, emulsifier & stabilizer. It is alkyl phenol ethoxylate-based and is highly water soluble. TERGITOL™...view more

Low molecular weight polycaprolactone polyol. Used in weatherable urethane coatings. Possesses low melt viscosity, exact functionality and long pot life. Provides batch-to-batch reproducibility...view more

Linear polycaprolactone polyol. Used in coatings. Possesses low melt viscosity, exact functionality and long pot life. Provides batch-to-batch reproducibility, outstanding low-temperature...view more

气相二氧化硅®E 9200年disper赢创是一个非常容易se, specialty filler. It is a structure modified, hydrophobic fumed silica and allows high loading levels at low viscosities. It offers low...view more

AEROSIL® E 972 by Evonik is a rheology control additive based on a fumed silica after-treated with DDS (dimethyldichlorosilane). Offers good dispersibility, anti-settling & anti-sagging effects and...view more

Aradur® 3088 by Huntsman Advanced Materials is a solid epoxy amine adduct. Acts as a catalytic crosslinker and accelerator. It is compatible with other epoxy hardeners such as dicyandiamide. Aradur®...view more

Aradur® 3261-1 by Huntsman Advanced Materials is a solid epoxy amine adduct with high reactivity. Acts as a catalytic curing agent and accelerator. It is compatible with epoxy resins. Aradur® 3261-1...view more

Aradur® DT 3126-2 by Huntsman is a solid epoxy amine grade-based accelerator. It is suitable for epoxy-polyester hybrid and polyester-TGIC powder coatings. Suggested use level is 1 to 4 wt. % for hybrids...view more

Araldite® ECN 9699 by Huntsman Advanced Materials is an epoxy cresol novolac resin available in solid form. It is suitable for use in coatings. Araldite® ECN 9699 complies with the REACH regulation...view more

Araldite® GT 16099 by Huntsman Advanced Materials is bisphenol A type 9 epoxy resin available in solid form. Possesses high molecular weight and medium viscosity. It is used in coatings. Araldite®...view more

Omnimer VCL by IGM Resins is a reactive diluent for radical initiated UV curable coating and ink formulations based on acrylates. It has excellent hydrophobic characteristics, low shrinkage and...view more

Omnirad 4MBZ Flakes by IGM Resins is an effective Type II photoinitiator used, in combination with tertiary amine synergists, to initiate radical polymerization of unsaturated oligomers e.g. acrylates after...view more

KRATON™ D1155 JOP by KRATON is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. Supplied as dusted dense pellets. Used in coatings. KRATON™ D1155 JOP...view more

Solsperse® V360 by Lubrizol is a 50 % active hyperdispersant in Aromatic 100 solvent. It provides increased productivity, high pigment/filler loading, and increased color strength. Offers high...view more

Solsperse® V320 by Lubrizol is a 100 % active hyperdispersant. It provides increased productivity, high pigment/filler loading, and increased color strength. Offers high gloss, brighter colors, good...view more

Polyethylene sheetfed compound. Used in sheetfed printing inks. Provides very good rub resistance and good gloss retention...view more

Polyethylene sheetfed compound. Used in sheetfed printing inks. Provides good rub resistance. Offers good gloss retention...view more

Mixture of the 2,3 and 3,4 isomers of toluenediamine. used as a chemical intermediate in the manufacture of antioxidants, triazole corrosion inhibitors, rubber chemicals, polyols and dyes. Because...view more

Polytetramethylene ether glycol, diols produced through the polymerization of tetrahydrofuran, white, waxy solids at room temperature. used in automotive, adhesives and Sealants, coatings...view more

Polytetramethylene ether glycol. Diols produced through the polymerization of tetrahydrofuran, white, waxy solids at room temperature. used in automotive, adhesives and Sealants, coatings...view more

Polymeg® 650 POLYOL by LyondellBasell is polytetramethylene ether glycol. Diols produced through the polymerization of tetrahydrofuran, white, waxy solids at room temperature. Polymeg® 650 POLYOL is used in automotive...view more

Polytetramethylene ether glycol, diols produced through the polymerization of tetrahydrofuran, white, waxy solids at room temperature. used in automotive, adhesives and Sealants, coatings...view more

1,10- Decanediamine by Mitsui Chemicals acts as a monomer. It is an aliphatic diamine. The epoxy resin made from this monomer has excellent wet resistance and mechanical properties. 1,10- Decanediamine is used in an epoxy...view more

1,10- Decanediamine by Mitsui Chemicals acts as an aliphatic diamine curing agent for epoxy resin. It is a white solid...view more

1, 12- Dodecanediamine. Acts as an aliphatic diamine curing agent for epoxy resin. It is a white or pale yellow solid...view more

1,12- Dodecanediamine. Acts as a monomer. It is an aliphatic diamine. The epoxy resin made from this monomer has excellent wet resistance and mechanical properties. Used in an epoxy curing agent...view more

4, 4’-(m-Phenylenediisopropylidene) dianiline. Acts as a monomer. It is a methylene inserted aliphatic diamine. The resin made from this bisaniline-M has an excellent heat resistance and mechanical...view more

Armac® T by Nouryon functions as a mineral and pigment, dispersing agent and emulsifier, floculant, adjuvant and anticaking agent. It is a primary tallow amine acetate salt. Armac® T is suitable for...view more

Armeen® HT by Nouryon is a primary alkyl amine-based hydrophobing agent. It is hydrogenated tallow alkyl amines. Armeen® HT is suitable for inks and mineral coatings...view more

Ethomeen® HT/12 by Nouryon is a hydrogenated tallow amine ethoxylate grade. It acts as an emulsifier and antistatic agent. Soluble in white spirit, xylene, ethanol, octanol and 2-propanol...view more

D.E.H.™ 81 by Olin is a solid phenol with intermediate reactivity. Acts as a curing agent. It contains curing catalyst and polyacrylate flow modifier. Exhibits good water spot and chemical...view more

D.E.H.™ 82 by Olin is a solid phenolic resin with high reactivity. Acts as a curing agent. It contains curing catalyst and polyacrylate flow modifier. Can be used in low temperature applications in...view more

D.E.H.™ 84 by Olin is an unmodified solid reaction product of liquid epoxy resin and bisphenol A containing about 2% of a curing accelerator. Acts as a curing agent. D.E.H.™ 84 by Olin is designed...view more

D.E.H.™ 85 by Olin is an unmodified solid reaction product of liquid epoxy resin and bisphenol A. Acts as a curing agent. D.E.H.™ 85 by Olin is designed for use in epoxy powder coatings...view more

D.E.H.™ 87 by Olin is a higher molecular weight unmodified solid reaction product of liquid epoxy resin and bisphenol A. Acts as a curing agent. Offers high degree of flexibility and good storage...view more

Colour Black FW 1 by Orion Engineered Carbons is an amorphous carbon. Used for high jet coatings...view more

Colour Black FW 18 by Orion Engineered Carbons is an amorphous carbon. Used for high jet coatings, also for tinting of coatings and for plastics and synthetic fibres. Colour Black FW 18 is also recommended for plastics and for...view more

Colour Black FW 2 by Orion Engineered Carbons is an amorphous carbon. Used for coatings with the highest jetness, metallics and varnishes for wood. Mainly recommended for solvent-borne systems...view more

Colour Black FW 285 by Orion Engineered Carbons is an amorphous carbon. Used for coatings with the highest jetness, metallics and powder coatings. Mainly recommended for water-borne systems...view more

Colour Black S 160 by Orion Engineered Carbons is an amorphous carbon. Designed for use in black coatings, plastics, synthetic fibers and india inks...view more

Lauryl alcohol 23 ethylene oxide (EO). Acts as a non-ionic surfactant, dispersing agent, humectant as well as wetting agent. It is an excellent surface tension reducer which is generally unaffected...view more

Nonylphenol 100 ethylene oxide (EO). Acts as a non-ionic surfactant and dispersant. In ULTRANEX® NP 1000 the hydrophobic part of the molecule comes from nonylphenol and the hydrophilic part from the...view more

Nonylphenol 23 ethylene oxide (EO). Acts as a non-ionic surfactant, emulsifier as well as dispersing agent. In ULTRANEX® NP 230 the hydrophobic part of the molecule comes from nonylphenol and the...view more

Nonylphenol 30 ethylene oxide (EO). Acts as a non-ionic surfactant, emulsifier as well as dispersing agent. In ULTRANEX® NP 300 the hydrophobic part of the molecule comes from nonylphenol and the...view more

Nonylphenol 40 ethylene oxide (EO). Acts as a non-ionic surfactant, emulsifier as well as dispersing agent. In ULTRANEX® NP 400 the hydrophobic part of the molecule comes from nonylphenol and the...view more

Acrylamac® HS 232-2314 by PCCR USA is a hydroxyl-functional, 80% solids, HAPs-free thermosetting solution acrylic resin. Offers low formulation cost, low isocyanate demand, superior adhesion...view more

High solids polyester resin. Has very good appearance, hardness, flow and leveling. Produces low VOC coatings with very good film properties...view more

High solids, HAPS free, VOC exempt polyester resin. Exhibits outstanding overall performance combined with very good gloss retention under accelerated weathering conditions. Offers superior...view more

BECKOSOL® P-531-70-X by Reichhold (Polynt) is a long soyabean oil alkyd resin supplied as solid content 70% in xylene. Exhibits excellent durability, excellent initial color & gloss, excellent color...view more

NAFOL 24+ by Sasol is a blend of high purity linear primary alcohols with even-numbered carbon chain lengths. It is available in off-white color waxy solid form with slight sweet odor. NAFOL 24+ is...view more

CYLINK® MBA Monomer (N,N’-Methylene Bisacrylamide) by Solvay is an effective and versatile bi-functional methacrylate monomer. It acts as a crosslinking agent. CYLINK® MBA Monomer (N,N’-Methylene...view more

Microcrystalline wax (100% by weight). It is a white to yellow colored solid. Insoluble in water and soluble in oil & organic solvents. Used in inks. Meets FDA (U.S. Food and Drug Administration)...view more

STEPANPOL® PC-1015-55 by Stepan Company is a solvent-free saturated polyester resin. It exhibits good aging and elastomeric properties. STEPANPOL® PC-1015-55 is used to yield high gloss flexible...view more

STEPANPOL® PC-1015-55 by Stepan Company is a linear aliphatic polyester polyol. It exhibits good aging and elastomeric properties. STEPANPOL® PC-1015-55 is designed for high gloss flexible urethane...view more

STEPANPOL® PC-1015P-120 by Stepan Company is a solvent-free saturated polyester resin. It exhibits good aging and elastomeric properties. It is used to yield high gloss flexible urethane coatings in...view more

STEPANPOL®pc - 1015 - p - 120年斯捷潘林公司是一家ear aliphatic polyester polyol. It is used to yield high gloss flexible urethane coatings in a wide variety of solvents. It exhibits good aging and...view more

STEPANPOL® PC-1017P-55 by Stepan Company is a solvent-free saturated polyester resin designed for castable urethane elastomers. It exhibits good mechanical strength and outstanding hydrocarbon- &...view more

环氧Resin E12 by Tech-power (Huangshan) is a BPA-type solid epoxy resin. It is mixed with liquid flowing agent. It provides fine chemical stability, strong adhesion, and excellent electric...view more

Bicyclo-[2.2.1] heptane (Synonyms: 2-Norbornylene, 2-Norbornene and Norcamphene). It is made by the Diels-Alder reaction of cyclopentadiene and ethylene, two readily available hydrocarbons. The...view more

HARDLEN® PMA-L by Toyobo is used as an adhesion promoter for PP substrate. It is chlorine-free environmentally friendly grade. It can be easily melted on substrates at low temperature. HARDLEN® PMA-L is...view more

TiONA® 595 by Tronox is a multipurpose, chloride-process, rutile titanium dioxide pigment. It offers high opacity, multipurpose durability and superior dispersibility. Exhibits exceptional tint...view more

TiONA® 696 by Tronox is a high-performance, super durable, chloride-process rutile titanium dioxide pigment. Provides a unique combination of ease of dispersion, high optical properties and...view more

TiONA® R-KB-2 by Tronox is a general-purpose, sulfate processed rutile titanium dioxide pigment. It is designed to provide easy dispersion in a wide range of coatings applications. Offers very good...view more

Polyphase® P100 by Troy Corporation is a non-metallic fungicide or mildewcide. Used in paper coatings, inks, protective paints & stains, wood preservation and wood protection. Provides protection...view more

PLASTICOLORS® MS-02884 by Chromaflo Technologies is a black color carbon black (22%) pigment. It is pumpable, flowable and pourable in a manner that makes it exceptionally easy to handle. Its...view more

PLASTICOLORS® MS-070002 by Chromaflo Technologies is a red color iron oxide (59%) pigment. It is pumpable, flowable and pourable in a manner that makes it exceptionally easy to handle. Its ability...view more

PLASTICOLORS® MS-070010 by Chromaflo Technologies is a red color naphthol (28%) pigment. It is pumpable, flowable and pourable in a manner that makes it exceptionally easy to handle. Its ability to...view more

PLASTICOLORS® MS-070022 by Chromaflo Technologies is a red color disazo (15%) pigment. It is pumpable, flowable and pourable in a manner that makes it exceptionally easy to handle. Its ability to...view more

PLASTICOLORS® MS-10804 by Chromaflo Technologies is a white color titanium dioxide (64%) pigment. It is pumpable, flowable and pourable in a manner that makes it exceptionally easy to handle. Its...view more

EPIKOTE™ Resin 154 by Westlake Epoxy is a polyfunctional epoxy phenol novolac resin. It imparts very good dimensional stability, high temperature as well as chemical resistance. EPIKOTE™ Resin 154 is used in high...view more

EPIKOTE™ Resin 154-B-80 by Westlake Epoxy is polyfunctional epoxy phenol novolac resin. It imparts very good dimensional stability, high temperature resistance as well as high chemical resistance...view more

EPIKURE™ Curing Agent 3175 by Westlake Epoxy is a curing agent. It is designed for use with epoxy resins to formulate high solids, two component, ambient-cure coatings. This modified polyamide...view more

EPIKURE™ Curing Agent 3192 by Westlake Epoxy is a curing agent designed for use with liquid epoxy resins in formulating high-solids, high-build coatings. It is a modified polyamide supplied at 100...view more

EPON™ Resin 1001-CX-75 by Westlake Epoxy is a 75% solids solution of an EPON™ Resin 1001F type epoxy resin in a blend of 65% methyl isobutyl ketone, and 35% xylene. It can be formulated to have...view more